Mountfield Petrol Garden Multitool MM2605 5 in 1

Mountfield Petrol Garden Multitool MM2605 5 in 1

£299.00

The Mountfield Petrol Garden Multitool MM2605 5 in 1 is an excellent machine. If you are serious about gardening, then you need this piece of kit!

Category:

Mountfield Petrol Garden Multitool MM2605 5 in 1

The Mountfield Petrol Garden Multitool MM2605 5 in 1 is an excellent machine. If you are serious about gardening, then you need this piece of kit! Mountfield’s MM2605, 5-in-1 multi-tool is powered by a two-stroke engine, with 5 tools in one – resulting in space saving in your shed or garage. All your trimming and pruning needs catered for in one product. It’s genius.  The high-performance powerhead delivers strong, consistent power, ensuring each attachment works effortlessly for any garden task.

  • Easy start 25.4cc 2-stroke petrol engine
  • Tap & Go nylon head and 3 toothed metal blade grass trimmer attachments
  • 40cm Hedge Trimmer attachment
  • 25cm pole pruner attachment
  • 70cm Extension pole
  • Single harness

Description

This versatile 5 in 1 Multi-Tool from Mountfield is powered by a two-stroke engine. After mixing petrol and oil at a ratio of 40:1, the only head-scratching will be deciding which tool to fix and use first.

You have a choice: use the Tap & Go nylon head for grass trimming; the 3 toothed metal blade for cutting those scratchy brambles and other rough vegetation; trim up your hedges with the 43cm hedge trimmer dual action laser cut blades; use the 25cm pole pruner chainsaw head to clear a few low branches or fit the 70cm extension pole to reach even higher.

It’s easy to swap heads, the MM2605 5 in 1 is comfortable using the single harness (included) and each and every tool is effective. It’s just a pity that there isn’t a built-in Thermos flask carrier. You can’t have everything, but this product does come with a five-year extended warranty! (T&C’s apply).

Product Dimensions with various attachments
• Length of Unit as a Pole Pruner – 207cm
• Length of Unit as a Pole Pruner with extension pole – 277cm
• Length of Unit as a Hedge Trimmer – 226cm
• Length of Unit as a Hedge Trimmer with extension pole – 296cm

Technical Specifications

Power

Power source Petrol 2-stroke

Power 0.7 kW

Displacement 25.4 cm³

Engine rotation speed 11000 rpm

Maximum engine speed 11000 rpm

Idling speed (+/- 100) 3100 rpm

Starter Easy start recoil

Primer Yes

Choke Manual

Fuel tank capacity 0.65 l

Carburettor type Rotary valve

Ignition coil type Analogic

Air filter type Sponge

 

Cutting system

Nylon line diameter (millimetre) 2,4

Cutting width 43 cm

Cutting length 40 cm

Blade length 43 cm

Nylon head type Tap & Go dual line

Nylon line length 4 m

Blade type Dual action – Laser cut

Teeth distance 25 mm

Blade diameter (brush cutter) 255 mm

Blade type (brush cutter) 3 T

Blade rotation angle 180 °

Bar type Sprocket nose

Bar length 25 cm

Bar length (inches) 10 in

Chain type 3/8″ .050″ (91PJ-40X)

Chain speed 5.2 m/s

Chain oil tank capacity 0.12 l

Chain oil pump Automatic

Chain tensioning system Front screw tensioning

 

Equipment

Handle type Loop

Vibe Control System (VCS) Yes

Shaft tube diameter 26 mm

Inner shaft diameter 8 mm

Brushcutter attachment Yes

Lawn trimmer attachment No

Hedger attachment Yes

Soft grip handle Yes

Shaft extension 70 cm

Harness Single

Pruner attachment Yes

 

Related products